Telstra 13550 - Page 40

40
-OR-
Lift up the handset and enter the telephone number.
Place the handset back onto the main base unit within 60 seconds. The
speakerphone will be turned on automatically and call is made.
To end the call, press .
Answer a call using Power Fail Back-Up mode
If there is only one handset registered to the base:
When the phone rings, keep the handset on the main base unit and press or
to answer the call. The speakerphone will be turned on automatically and call is
made.
To end the call, press .
1.
2.
3.
1.
2.
Notes:
If there is more than one handset registered to the base, the handset on
the main base unit should be left as a power supply of the base and you can
use the other handset(s) to make calls like normal.
The handset should always remain on the main base unit for the entire
length of the call.
•
•
Notes:
If there is more than one handset registered to the base, the handset on
the main base unit should be left as a power supply of the base and you can
use the other handset(s) to receive calls like normal.
The power supplying handset should always be placed on the main base
unit for the entire length of the call.
The range of the base unit is limited during Power Fail Back-Up mode. Keep
the handset close to the base unit.
•
•
•