EasyManua.ls Logo

Telstra T-BOX - A FEW USEFUL BITS; LED Status Indications; Standby and Sleep Modes; Software Updates

Telstra T-BOX
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42
A FEW
USEFUL BITS
LED STATUS INDICATIONS
The LED light on the front left hand side of your T-Box
®
indicates the status
of your T-Box using the following light patterns:
•YourT-Boxispoweringup:Flashingeverysecond
•YourT-Boxisswitchedon:Steadylight
•YourT-Boxisinstandbymode:Lowlight
•YourT-Boxisinsleepmode:Lightpulsesatlowintensityevery3seconds
•YourT-Boxisreceivingaremotecontrolcommand:Flashingwhitequickly
•YourT-Boxisindeepsleep:Nolight
YourT-Boxiswaitingtobepairedwitharemotecontrol:Lightblinks3timesina
row, every 3 seconds
STANDBY MODE
Pressing the power button on the remote control will set your T-Box to standby.
Youcanpressthepowerbuttontoswitchitbackon.
YourT-Boxwillcontinuetomanageyourdownloadsandrunscheduled
recordings while it’s in standby mode. It is recommended that you do not switch
off your T-Box directly at the power point as this can cause problems with the
hard drive of your T-Box in standby mode. If the power plug needs to be switched
off and removed please put the T-Box in SLEEP MODE.
After a period of inactivity, your T-Box will transition to standby mode based on the
time set in the power-saving mode within 'Display Settings' in the 'Settings' menu.
SLEEP MODE
Pressing the power button on the remote control continuously for 3 seconds will set your
T-Box to sleep mode. A message will be displayed on your TV screen ‘Entering sleep mode,
please wait.’ This reduces the power consumption of the T-Box while it is not in use.
YoucanpressthepowerbuttonontheremotecontroltoswitchtheT-Boxback
on.YourT-Boxwillcontinuetomanageandrunscheduledrecordingswhileit’sin
sleep mode. Any movie downloads will be paused until the T-Box powers up.
UPDATES
If you keep your T-Box connected to the internet, it will be able to automatically
download and install any operating software updates as soon as theyre
available.(ThesedownloadsareunmeteredonBigPond
®
broadband.)
If your T-Box is installing an update:
•DonotswitchoffyourT-Boxorpressanybuttonsonyourremotecontrol
•Theunitwillautomaticallyswitchitselfoffandrestartoncetheupgrade
has been completed

Other manuals for Telstra T-BOX