Document Version: V1.3
6
2.2 Shutdown
Do not directly cut off the power of the NVR to force a shutdown; otherwise, the HDD
may be damaged, causing video loss and even damage to the NVR.
Step 1 Connect the mouse and monitor to the NVR.
Step 2
Click in the upper-right corner on the GUI of the NVR (to exit the full-screen
interface), click Shutdown , and then click OK.
Step 3 When “The Device is Shutdown. Please Cut Off the Power” appears on the screen, unplug
the power adapter of the NVR.
---End
To Next Page
Loading...