Document Version: V1.3
44
4.4.9 Modify Channel Sequence
You can adjust the display sequence of each channel on the live view page as required.
Procedure:
Step 1 Log in to the GUI of the NVR.
Step 2 Click Live View to ensure that the current live view mode is window division mode. If not,
set the live view mode to window division mode first. Refer to Switch Window Division
Mode for detailed steps.
Step 3 Click and drag the channel you want to adjust the live view position to another live view
screen position, then release the mouse.
---End
The display positions of the two channels have been exchanged successfully.
To Next Page
Loading...