Tenda N3L-4H - Channel Info

Document Version: V1.3
171
Parameter
Description
Uptime
Specifies the time during which the NVR is operating since the last start.
4.7.2 Channel Info
Navigate to Maintenance > Channel Info. The N6P-4H is taken as an example here.
You can view such channel information as channel name, camera model, IP address, status and the
resolution of the main stream/sub-stream, frame rate and bitrate.
Parameter description
Parameter
Description
Channel
Specifies the number of channels in which the camera locates.
Channel Name
Specifies the name of the channels in which the camera locates.
IP Address
Specifies the IP address of the camera.
Model
Specifies the model of the camera.