Document Version: V1.3
72
4.6 Configuration
On the configuration page, you can configure the primary functional parameters of the device,
including channel management, storage management, alarm management, network configuration,
and system configuration.
The configuration page supports basic settings and professional settings. Unless otherwise
specified, the professional settings are illustrated here.
4.6.1 Show or Hide Professional Setting
Click Configuration to enter the page.
The professional mode is disabled by default. If you want to enable the professional mode for
more settings, perform the following operations.
Enter the GUI of the NVR, click Configuration, and find and click Show Pro Settings in the lower-
left corner.
To Next Page
Loading...