Tenda N3L-4H - Channel Management

Document Version: V1.3
73
4.6.2 Channel Management
On the channel management page, you can manage cameras and configure OSD display, image
parameters, and video parameters.
Camera Management
Overview
Navigate to Configuration > Channel > Camera.
You can manage cameras here, such as adding, editing or deleting cameras, upgrading camera
software and viewing camera status.
- Online Camera: It displays the cameras currently in the same local area network as the NVR.
- Added Camera: It displays the cameras that have been successfully added to the NVR.
Parameter & button description
Parameter
Description
Auto Add LAN Cameras
Specifies whether to enable the NVR to automatically add LAN cameras.
Once it is enabled, the camera connected to the NVR can be discovered
and added automatically within 2 minutes after the NVR is started. After
2 minutes, the camera can be discovered automatically and a prompt will
be displayed through a pop-up window, and you can manually add it.
Online Camera
No.
Specifies the number of the camera.
IP Address
Specifies the IP address of the camera.