Document Version: V1.3
28
4.4.3 Quickly Add a Camera
If you want to add other brand cameras, connect the camera to the LAN where the
NVR is located using an Ethernet cable.
When adding cameras in the kit, ensure that the cameras are in the factory settings. If
not, reset the cameras first.
The camera in the wireless video security kit can be discovered and added
automatically within 2 minutes after the NVR is started. After the NVR is working
properly, the camera can be discovered automatically, but you need to add it
manually.
In the PoE video security kit, if the camera is connected to the PoE port of the NVR,
the camera will be discovered and added by the system within 2 minutes.
The number of cameras that can be added varies with the NVR models. Add a camera
according to the actual situation.
Method 1
Step 1 Connect the camera to the LAN where the NVR is located. If the Wi-Fi camera is included
in the video security kit, place the camera within the coverage range of the NVR.
Step 2 Click Live View, right-click and select Add Camera.
Step 3 Add the camera on the Online Camera module.
Method 1: Locate the camera you want to add according to the serial number (S/N), tick
the box before it, and click Add.
To Next Page
Loading...