3 Activation and Quick
Setup
You can activate the NVR upon the first use or after resetting the NVR. Tenda NVR supports local
activation and web activation.
- Local activation: After the activation is completed, you can enter the quick setup page to
quickly set up the monitoring network.
- Web activation: After the activation is completed, you need to log in again.
3.1 Local Activation and Quick Setup
Step 1 Power on the NVR, connect the monitor to the VGA port or HDMI port of the NVR using a
VGA/HDMI cable, then connect the mouse to the USB port of the NVR.
To Next Page
Loading...