Tenda N3L-4H - Switch Window Division Mode

Document Version: V1.3
34
4.4.6 Switch Window Division Mode
Different window division modes correspond to different numbers of window divisions. Tenda NVR
supports single-screen and window divisions.
Method 1
Step 1 Log in to the GUI of the NVR.
Step 2 Click Live View.
Step 3 Right-click to select Single Screen and the channel to be displayed on the single-screen, or
select Four Screens (For the NVR with more than 4 channels, select window division and
window division mode.).
---End
Method 2
The live view with four screens is used for illustration here.
Step 1 Log in to the GUI of the NVR.
Step 2 Click Live View.
Step 3
Click Window Division ( ) in the lower-right corner, then choose the window division
mode as required.
---End