Document Version: V1.3
194
5.2 Live View
5.2.1 Overview
Click Live View to enter the page.
The default page is the live view page after you enter the web UI of the NVR. The number of
window divisions of devices varies with different models. The actual model prevails. In this section,
you can check the monitoring image of each channel, and perform such basic management as
switch division mode, recording and PTZ control for the channel or camera.
Some descriptions of parameters and functions are as follows. Refer to the Live View of the GUI
chapter for other content.
Parameter description
Camera.
Double-click the icon to start/stop the preview of this channel. By default, the preview is
not performed.
A green dot icon at the upper-right of the icon indicates that the monitoring image is
being previewed.
They are located on the left side of the page.
Click them to check or set the stream of a single channel.
To Next Page
Loading...