Tenda N3L-4H - Quick Operation

Document Version: V1.3
26
Parameter
Description
On the lower-left of the page.
Specifies the usage of input bandwidth.
/
Start or stop auto-switch live view.
Displays preview images in cycles from left to right and up to down according to the
channel position. The auto-switch dwell time is 5 seconds by default, and you can
modify it on the Live View Configuration page.
Live view division mode.
Specifies that the number of windows varies with the division modes.
Fullscreen.
Specifies that the live view page is displayed on full screen.
Used to add a camera.
Specifies the current user account does not have the live view permission for this
channel.
4.4.2 Quick Operation
Right-click the mouse on the live view page to perform a quick operation, such as window division,
auto-switch, adding the camera, playback and fullscreen.
Parameter description
Parameter
Description
Single Screen
Used to display single-channel images.
Four Screens
Used to display four-channel images.
Multiple Screens
Used to display multiple channel images. Available in NVRs with more than 4
channels.