Document Version: V1.3
25
Parameter description
Instant playback.
Used to play back the recordings of the channel 5 minutes before the current time.
Audio switch. On the bottom of the channel. By default, it is mute.
You can turn on, turn off or adjust the volume of the audio.
PTZ control. Only cameras that support PTZ can be edited.
Used to perform such related operations as adjusting the monitoring direction and
speed and setting preset for the PTZ camera. Refer to PTZ Control for more details.
Stream info.
Click it to check the current stream info, including stream type, resolution, frame
rate and bitrate.
On the upper-right corner of the channel.
Specifies the audio of the video is enabled.
Human detection alarm.
Once the human detection function is enabled, if the camera detects a human, this
icon will be shown on the upper-right of the channel monitoring image.
Motion detection alarm.
Once the motion detection function is enabled, if the camera detects that the
moving range of the target reaches the threshold corresponding to the preset
sensitivity, this icon will be shown on the upper-right of the channel monitoring
image.
Tempering detection alarm.
Once the tempering detection function is enabled, if the camera detects that the
degree of tempering reaches the threshold corresponding to the preset sensitivity,
this icon will be shown on the upper-right of the channel monitoring image.
Recording.
When the channel is recording, this icon will be shown on the upper-right of the
channel monitoring image.
Previous Screen.
Switch to the previous screen.
Next Screen.
Switch to the next screen.
To Next Page
Loading...