Document Version: V1.3
168
Live View Configuration
Overview
Navigate to Configuration > System > Live View.
You can modify the live view information of the NVR, including auto-switch dwell time, single-
screen alarm dwells time, lock screen time and default live view division.
Parameter description
Specifies the image dwell time during auto-switch live view on the Live View
page.
Single Screen Alarm Dwell
Time
Specifies the dwell time of the single-screen display of the alarm image when
the alarm mode is Single-screen display and an alarm is triggered.
Specifies the page idle timeout time.
After entering the GUI of the NVR, if there is no operation during the Lock
Screen Time, the system will automatically log out and return to the Live View
page.
0 indicates that the screen will not be locked.
Default Live View Division
Specifies the default number of division screens for a single screen of the live
view page. You can modify it according to the actual situation.
To Next Page
Loading...