Document Version: V1.3
145
Specifies the encryption mode for mail transmission.
-
None: No encrypted transmission.
-
SSL: Secure Sockets Layer is a security protocol. It uses data encryption,
identity verification, and message integrity verification mechanisms to
provide security guarantees for network data transmission.
-
TLS: Transport Layer Security is a security protocol that provides security
and data integrity for network communications.
Specifies whether to send alarm pictures.
After this function is enabled, when the system detects an alarm, it will send an
alarming video and the captured picture at the same time.
Specifies the number of recipients.
Specifies the name of the recipient. You can customize it as required.
Specifies the email address of the recipient.
Used to test whether mail is sent and received normally.
Configure Email Alarm
Scenario: Assume that you have set up the monitoring network with NVR, and D1 to D4 have been
connected to the camera.
Requirement: If there is a channel error in D1 to D4, such as the Camera offline, an alarm
notification will be pushed through email.
Solutions: Configure the Exception Detection and Email Configuration functions to meet this
requirement.
- SMTP server address: smtp.gmail.com
- SMTP service port: 465
- Sender email address: Tom@gmail.com
- Encryption mode: SSL
- Recipient email address: Jerry@gmail.com
To Next Page
Loading...