Document Version: V1.3
165
Procedure:
Step 1 Log in to the GUI of the NVR.
Step 2 Navigate to Configuration > System > Users.
Step 3 Add the login user account.
1. Click Add at the bottom of the page.
2. Set the user name and password. The following figure is for reference only.
3. Re-enter the login password in Confirm Password input box.
4. Enable the Unlock Pattern and draw an unlock pattern by following the instruction.
5. Set the management permissions of this account.
(1) Set the local permission of this account, which are Configuration and Maintenance
in this example.
(2) Click Remote and set the remote permission of this account, which is Configuration
in this example.
To Next Page
Loading...