Document Version: V1.3
177
Check System Log
Assume that you want to check the exception log information from 12:00:00 on October 30, 2021
to 16:00:00 on October 31, 2021.
Procedure:
Step 1 Log in to the GUI of the NVR.
Step 2 Navigate to Maintenance > Device Log.
Step 3 Set Type, which is Exception in this example.
Step 4 Set the Start Time and End Time, which is 12:00:00 on October 30, 2021 to 16:00:00 on
October 31, 2021 in this example.
Step 5 Click Search.
---End
After the search completes, you can check the related information as required.
To Next Page
Loading...