Document Version: V1.3
184
Step 6 Enter the number of ping packets. The default value is recommended.
Step 7 Click Start.
---End
The diagnosis result is displayed on the right side of the page. See the following figure.
Execute Traceroute Command to Detect Connection Quality
Assume that you want to detect whether the link between the NVR and Facebook
(www.facebook.com) is unblocked.
Procedure:
Step 1 Log in to the GUI of the NVR.
Step 2 Navigate to Maintenance > Diagnosis.
Step 3 Set Custom Diagnosis, which is Traceroute in this example.
Step 4 Enter the destination IP address or domain name, which is facebook.com in this example.
Step 5 Enter the number of hops. The default value is recommended.
Step 6 Click Start.
To Next Page
Loading...