Document Version: V1.3
30
Method 2
This method is not available in the PoE video security kit series products.
Step 1 Connect the camera to the LAN where the NVR is located. Place the Wi-Fi camera in the
video security kit within the coverage range of the NVR.
Step 2 Click Live View.
Step 3
In the New Camera Found pop-up window, you can find the camera you want to add, and
then click in order or click Add All directly.
---End
Wait a moment until the camera is added successfully. You can view the added cameras in the
Added Camera module on the Configuration > Channel > Camera page.
To Next Page
Loading...