Document Version: V1.3
41
Call Patrol
Control the camera patrols according to the specified track.
- Before the patrol is called, you can Set the Preset for this patrol first.
- Only one patrol can be called at the same time.
Procedure:
Step 1 Log in to the GUI of the NVR.
Step 2
Click Live View, hover the mouse over the camera channel you want to perform PTZ
control, and click at the bottom of the channel.
Step 3
Click the Patrol tab, target the patrol you want to call, and then click .
---End
The camera will automatically patrol in sequence according to the preset that has been added to
the patrol. Click to stop patrol.
To Next Page
Loading...