Document Version: V1.3
61
Add Tag for the Searched Recording File
Assume that you want to add a tag to a target alarm recording when you are viewing the alarm
recording files of D1 all day on October 30, 2021.
Procedure:
Step 1 Log in to the GUI of the NVR.
Step 2 Navigate to Playback > File.
Step 3 Tick D1.
Step 4 Select the time, which is 00:00:00 to 23:59:59 on October 30, 2021 in this example.
Step 5 Select the file type, which is Alarm in this example, then click Search.
Step 6
Double-click the recording file on the left to play back the recording file on the right, then
click (tag) in the lower-left corner.
To Next Page
Loading...