EasyManuals Logo

Tenda O3 User Manual

Tenda O3
198 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #152 background imageLoading...
Page #152 background image
144
The added rule displays in the bandwidth control list. The parameters on the picture below are
used for examples.
Parameters description
Name
Description
Remark
It specifies the additional information of the bandwidth control rule. This field is
required. For convenient management, youd better specify different remarks for
different rules.
IP Address Range
It specifies the IP address or IP address range of devices that this rule applies to.
If you want to control only one device, enter the same IP address in the two boxes. If
you want to control multiple devices, enter an IP address range including start IP
address and end IP address. The end IP address should be greater than the start IP
address.
Max. Upload Rate
It specifies the maximum upload/download rate of the device whose IP address is
within the IP Address Range.
Max. Download Rate
Status
It specifies the current status of the rule. You can enable or disable it as required.
Action
Click to delete the rule.
8.3.2 Example of configuring bandwidth control
Networking requirement
The CPE is used to bridge to the ISP hotspot for internet access in a house in the countryside, and
the device is set to WISP mode. To ensure that every device can access the internet smoothly, you
want to specify a maximum upload/download for each device.
Assume that: The maximum upload rate of each device connected to the WiFi network of the
device is 5 Mbps, and download rate is 10 Mbps. And the IP address range of the devices
connected to the WiFi network is 192.168.2.100 to 192.168.2.200.

Other manuals for Tenda O3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tenda O3 and is the answer not in the manual?

Tenda O3 Specifications

General IconGeneral
5 GHzNo
2.4 GHzYes
Number of users15 user(s)
Transmitting power29 dBmW
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Receiver sensitivityMCS0: -88dBm MCS7: -72dBm
Maximum outdoor range5000 m
Maximum data transfer rate150 Mbit/s
USB 2.0 ports quantity0
Ethernet LAN (RJ-45) ports1
PlacementWall
CertificationFCC / CE / RoHS
Product colorWhite
LED indicatorsLAN, Power, WAN
International Protection (IP) codeIP64
Antenna featuresIntegrated antenna
Antenna gain level (max)12 dBi
Output current1 A
Output voltage12 V
Power consumption (max)6 W
Security algorithmsWPA, WPA2, WPA2-PSK
Cables includedLAN (RJ-45)
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)-20 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth94.86 mm
Width270 mm
Height67.5 mm

Related product manuals