R502 Multifunctional Broadband Router User Guide
28
the LAN Server appointed by
IP address.
1. Enable: Only after you
select it, all the settings
come into effect.
2. Common Port: Service
Port in WAN end (Service
Port provided to WAN by
router) has listed the
protocol ports in common
use. You may select one of
them and add to the box. For
those ports not listed in
common ports, you can add
it manually.
3.IP Address: fill in PC’s IP
address which will work as
Server in LAN.
4. TCP, UDP, ICMP: Select
the Service protocol you
have.
5.Add: add it to Virtual
Service list
To Next Page
Loading...
