R502 Multifunctional Broadband Router User Guide
network address scope with the WAN
or LAN port.
2 Destination IP address is the
address of a Host. And the Subnet
Mask must be 255.255.255.255
If the Destination IP is a scope, then it
must match with Subnet mask. For
example, if the Destination IP is
10.0.0.0, Subnet Mask must be
10.1.2.0; if the Destination IP is
10.1.2.0, then the Subnet Mask must
be 255.25.255.0.
42
2.13 System Tool
Time Setting
This section sets the router
system time. You may select
setting the time by yourself or
getting the standard GMT time.
Notice: Turn off the power
Supply of the router, the time
information will lose.
when you open your computer
and connect with the internet ,
the router will get the GMT time
To Next Page
Loading...
Need help?
General
