R502 Multifunctional Broadband Router User Guide
41
2.12 Routing Setting
Routing Table
System routing table is a table of
the router that owns the fixed
route which is
setted by the system in advance.
Generally speaking, it is
configured after starting the
system. Router table can decide
where the computer data go.
Static Routing Table
1、Destination IP: It is the IP
address or IP Range of the Host
that will be accessed.
2、Subnet Mask: Input Subnet
Mask. Generally speaking, it is
255.255.255.0;
3、Gateway: It is IP address of
router or Host where data packet
is sent ;
4. Operation: The setting will not
take effect until you click “add”.
Notice：
1. Gateway IP must be in the same
To Next Page
Loading...
Need help?
General
