R502 Multifunctional Broadband Router User Guide
Remote Web Management
This section sets the web
management port and IP address
of computer which can execute
remote web management in the
WAN;
1. Start: startup the function of
remote web
management.
2. IP address: It is the IP address
of the computer that can execute
the remote web management in
the WAN.
3. Port : It is the port number that
can execute web management.
Notice:
1. Default remote web
management port of the router
is 8080. Only you use the “IP
address” port (it is the IP
address of WAN port of the
router), can you enter the router
38
To Next Page
Loading...
