R502 Multifunctional Broadband Router User Guide
4. Communication protocol:
select the control protocol
TCP, UDP, IP. The protocol is
used by the data packet.
5. Time provision: Input the
starting time and stopping time
only among which the rule can
take effect;
6. Start: starting the filtering
rule;
7. Add the renovate: complete
the setting
For instance: if you don’t want
the computer with IP
192.168.0.7 to access any
website between 8:00
and18:00 on Sunday, but the
other computers are free. Then
you have to setup a data
packet filtering table according
to the figure on the right.
33
To Next Page
Loading...
Need help?
General
