R502 Multifunctional Broadband Router User Guide
1. MAC address filtering: select
“starting” the MAC address
filtering function;
2. Filtering rule: It is applied in the
option button of the following list.
Select “only forbid”, then the
MAC address of the list is
forbidden to access the internet.
Select “only permit”, then the
MAC address of the list is
permitted to access the internet.
3. MAC address: input the MAC
address of the computer you
want to control;
4.Add: add the above-mentioned
computer MAC address to the
MAC address bar;
5. Save: complete the settings.
36
For instance: if you don’t want the
computer with MAC Address
00:C0:9F:AD:FF:C5 to access
the internet but the other
computers can access the
internet, then you have to appoint
a data packet filtering table
according to the figure on the
To Next Page
Loading...
