R502 Multifunctional Broadband Router User Guide
47
notice：To avoid damage to
the router, do not interrupt the
upgrade procedure by turning off
the router or closing the browser.
The upgrading will take several
minutes.
Restore Factory Setting
Clicking the button of “restore
factory setting”, the router will be
restore to the default status at the
factory:
Default Username：admin
Default Password：admin
Default IP address：192.168.0.1
Default Subnet Mask:
255.255.255.0
Notice: After restoring factory
setting, it will not take effect until
you reboot the router.
To Next Page
Loading...
