Tenda TEG1024D User Manual

Copyright Statement
is the registered trademark of Shenzhen Tenda Technology
Co., Ltd. Other trademarks or trade names mentioned herein are the
trademarks or registered trademarks of the company. Copyright of the whole
products as well as its accessories and softwares, belongs to Shenzhen
Tenda Technology Co., Ltd. Without the permission of Shenzhen Tenda
Technology Co., Ltd, any individual or party is not allowed to copy, plagiarize,
imitate or translate it into other languages.
All the photos and product specifications mentioned in this manual are for
references only. As to the upgrade of softwares and hardwares, there will be
changes. And if there are changes, Tenda is not responsible for informing in
advance. If you want to know more about our products information, please
visit our website at www.tenda.cn

Tenda TEG1024D Specifications

General

MAC address table	8000 entries
Store-and-forward	Yes
Maximum data transfer rate	48 Gbit/s
Supported data transfer rates	10/100/1000 Mbps
Networking standards	IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x
Copper ethernet cabling technology	1000Base-T, 100Base-TX, 10Base-T
Wi-Fi	No
Size (imperial)	11 \
Power requirements	100 - 240 V
Networking features	Ethernet, Fast Ethernet, Gigabit Ethernet
Connectivity technology	Wired
Switch type	Unmanaged
Supported network protocols	UPnP
Basic switching RJ-45 Ethernet ports quantity	24
Certification	QA
Product color	Blue
Power consumption (typical)	20 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	85176990