Tenda TEG1024D User Manual

3
Front Panel and Rear Panel Specifications
The front panel of 16/24-Port Gigabit Ethernet Switch includes 16/24
1000Mbps RJ-45 ports in the right side and LED indicators in the left side.
Each 1000Mbps port has 1 LINK/ACT indicator, 1 1000Mbps indicator; 1
power indicator in the front panel.
Front panel view of the Switch
The rear panel has 1 AC power port, used for AC power input.
Rear panel view of the Switch
LED Indicator Specifications
The LED indicators of the Switch include Power, Link/ACT and
10/100/1000Mbps indicators. You can see their operating situation through
these LED indicators.

Tenda TEG1024D Specifications

General

MAC address table	8000 entries
Store-and-forward	Yes
Maximum data transfer rate	48 Gbit/s
Supported data transfer rates	10/100/1000 Mbps
Networking standards	IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x
Copper ethernet cabling technology	1000Base-T, 100Base-TX, 10Base-T
Wi-Fi	No
Size (imperial)	11 \
Power requirements	100 - 240 V
Networking features	Ethernet, Fast Ethernet, Gigabit Ethernet
Connectivity technology	Wired
Switch type	Unmanaged
Supported network protocols	UPnP
Basic switching RJ-45 Ethernet ports quantity	24
Certification	QA
Product color	Blue
Power consumption (typical)	20 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	85176990