ADSL2/2+ Router
or disallow clients at specific MAC addresses to connect to your
wireless network.
MAC Address Filter:
Selecting “Disable” means to deactivate the MAC
address filter feature. “Allow Access to Wireless Network” only allows
PCs at specified MAC addresses to connect to your wireless network
while
“
Deny Access to Wireless Network
”
only blocks PCs at specified
MAC addresses from connecting to your wireless network.
Add: Click it to add a new MAC to the MAC address list.
Delete: Click it to remove an existing entry.
For example: To allow only a PC at the MAC address of
44:37:e6:2a:18:52 to connect to your wireless network, do as follows:
1. Click “Add”, enter “44:37:e6:2a:18:52”, fill in Description field
and select “Enable” as seen below:
- 55 -
To Next Page
Loading...
