What to do if Tennant Scrubber has little or no spray?
If your Tennant Scrubber isn't spraying, start by refilling the solution tank. Then, inspect the spray tip for clogs and either clean or replace it. Make sure the spray tip angle is properly adjusted. Also, check the solution hose screen for any debris and clean it if necessary.
What to do if Tennant Scrubber brush does not spin?
If the brush on your Tennant Scrubber isn't spinning, first unplug the power cord and check the brush for any obstructions. Then, reset the 2.5 amp circuit breaker button.
How to fix little or no solution spray on Tennant T1?
If your Tennant Floor Machine has little or no solution spray, start by checking if the solution tank is empty and refill it if necessary. Also, inspect the solution tank screen for clogs and clean it.
What to do if Tennant Floor Machine brush does not spin?
If the brush on your Tennant Floor Machine isn't spinning, check if the brush circuit breaker has tripped. If so, turn off the main power switch, remove any obstruction from the brush, and reset the circuit breaker.
How to improve scrubbing performance of Tennant T1?
If your Tennant Floor Machine's scrubbing performance is poor, the brush may be worn and require replacement.
General| Brand | Tennant |
|---|---|
| Model | T1 |
| Category | Floor Machine |
| Language | English |
Parts for the 120V scrub head, specific serial number range.
Parts for the 120V scrub head, specific serial number range.
Parts for the 230V scrub head, specific serial number range.
Parts for the 230V scrub head, specific serial number range.
To Next Page
