1 INTRODUCTION
2
1.1 Product Identification (PIN)
The machine PIN is located on the identifi-
cation plate, on the front surface of the
operator enclosure.
Please state the model of the machine and
PIN when making inquiries in regards to
parts, service, or warranty.
1.2 Introduction
Thank you for purchasing a Terex Compact Track Loader. We are confident
that the machine you have chosen will provide excellent performance and effi-
cient operation.
The information contained in this manual is intended to provide the operator with
all necessary information for the proper use of the machine.
It is imperative that this manual be provided to the end user at the time of pur-
chase, prior to operation and kept with the machine at all times. If lost or dam-
aged, contact your dealer immediately to obtain a replacement prior to resuming
operation.
It is very important that the operator read and understand the information in
this manual prior to operating the machine or performing maintenance or
service.
During operation, it is very important that the operator obey the instructions
in this manual to ensure safe and efficient operation.
Should you need clarification or further explanation of the topics in this manual,
please contact your dealer immediately for assistance.
Information describing special equipment or attachments and their operation are
not included in this manual.
This manual should be stored in the black plastic manual box located inside the
cab enclosure.
1.3 Safety Alert Symbol
The safety alert symbol is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid
possible injury or death.
1.4 Intended Use
The machine with standard dirt bucket is intended to be used solely for work con-
sistent with its design. Such work includes loosening, collecting, transporting, and
distributing soil, rock, or similar materials as well as loading these materials onto
trucks, conveyors, or other methods of transport.
PT-110/PT-110F US O&M
2095-479 2013-02
To Next Page
Loading...
