Terex PT-110 - Maintenance Intervals

7 MAINTENANCE
78
7.3 Maintenance Intervals
7.3-1 Daily Maintenance Tasks
7.3-2 50-1000 hour Tasks
Page
1 Check hydraulic oil level (figure 7.7-3, p-82) 82
2 Check engine oil level 80
3 Check fuel level (gauge on instrument panel) 37
4 Check alternator / A/C belt tension / condition 83
5 Check track tension / condition 85
6 Check for proper control operation 40
7 Check for proper switch and lighting operation 37
8 Check / clean air cleaner elements 88,89
9 General visual check for cracks, damage, completeness 20,61
10 Check for leaks in hoses, tubes, valves, pumps, cylinders, etc. 18,27,61
11 Drain water separator 84
12 Lubricate all grease points 79
13 Inspect / clean the coolers and engine compartment 90-91
14 Inspect / clean undercarriages (as needed) 85
15 Inspect / clean chassis 91
16 Inspect/replace missing/damaged safety signs 12,13
Dail
y
Page
1 Inspect drive sprocket rollers (replace as needed) 87
Page
1 Replace engine oil & filter 81
2 Replace hydraulic filter(s) 83
3 Replace planetary oil (initial change only) 86
Page
1 Replace fuel filter element 84
2 Replace planetary oil (normal change interval after initial change) 86
Page
1 Replace hydraulic oil 82
2 Replace engine coolant (use SCA additive, see engine manual) 90
Every 50 operating hours
Every 250 operating hours
Every 500 operating hours
Every 1000 operating hours
PT-110/PT-110F US O&M
2095-479 2013-02