Machine Status Screen
This screen allows you to view the engine hours and miles that have accumulated
on the machine since new.
Active Faults
This screen will display any faults detected by the operator interface. The faults
recorded here are typically ones that must be corrected in order to operate the
machine.
If more than one fault is active, press the buttons beneath the up or down arrows
to view them.
4 MACHINE DESCRIPTION / CONTROLS
47
Machine Status
Engine Hours:
Miles:
224
463
Active Faults
fault ( 1) of ( 2)
2-Speed Fault -
Solenoid open or shorted
PT-110/PT-110F US O&M
2095-479 2013-02
To Next Page
