2.3.1 ISO Safety Signs
The safety signs are located in/on the machine as indicated. (Descriptions of the
symbols are provided in section 2.2)
Key
1. Fall hazard
2. Read operator’s manual / fall hazard (inside cab enclosure / fire notice)
3. Skin (oil) injection hazard
4. Crush hazard (pinch point)
5. Crush hazard (lift arm brace)
6. Crush hazard (run over)
7. Explosion / burn hazard (read operator’s manual) (on battery strap)
8. Crush hazard (lift arms)
9. Tie down locations, Front (on upper front corners of chassis)
To Next Page
Loading...
Need help?
General
