2.15 Parking the Machine
• Stop the machine only on an even and solid surface.
• Lower the lift arms to the frame stop and rest the bucket on the ground.
• Shut the machine down as described in section 5.13.
• Close the machine doors and windows (if equipped), remove the key to
secure the machine against unauthorized use.
2.16 Towing/Retrieving the Machine
• Always observe the correct procedure as described in the operating
instructions.
• The machine should be towed only in exceptional cases, for example to
bring the machine away from an endangered place for repair.
• Check all trailing and drawing devices for their safety when pulling or
towing.
• Towing equipment such as ropes, rods, etc., must be of the correct capacity
and must use at least two of the tie-down locations on the front or rear of
the machine on the chassis.
• Pull the rope taut slowly and carefully. A sudden jerk can cause a sagging
rope or cable to tear or snap.
2 SAFETY
24
To Next Page
Loading...
Need help?
General
