6 TRANSPORTATION
6.1 Transporting
At times, you will most likely need to transport the
machine to distant locations with a transport vehi-
cle. To do this safely, there are some precautions
that must be observed.
When transporting:
1. Always make sure the transport vehicle
(trailer or truck) being used to haul the
machine is capable of bearing the weight
and size of the machine over the distance
and terrain that will be covered.
2. Secure the machine to the transport vehicle bed, facing the direction of
travel, with heavy chains rated for use with a machine of this nature (size
and weight).
3. Attach the chains to the machine at all four tie down points (one on each
corner of the chassis) and secure to suitable locations on the transport
vehicle (Items A, see photos). Tighten as needed to eliminate possible load
shift during transport.
Note: Close and latch doors and windows, secure any loose items prior to trans-
porting.
A
59
A
Front
Rear
To Next Page
Loading...
Need help?
General
