TERMA SCANTER 1002 - Product Features

Page 13/62
Rev. A
2017-12-04
SCANTER 1002 Radar System
User’s Manual
1255194-HO
2.2 SCANTER 1002 product features
The SCANTER 1002 technology and product features are listed in the tables
below.
Fig. 2.3 SCANTER 1002 product features
2.2.1 Embedded tracker (ET2)
SCANTER 1002 is equipped with an embedded tracker (ET2), which automatically
identifies moving objects in the radar image. The tracker assigns to each object a
unique identity; determines the position, speed and course of the object; follows the
track of the object by predicting its position from scan to scan, and makes this infor-
mation available in the radar image.
• Software-defined functionality
• Frequency diversity
• Full coherency and pulse compression
• Transmitter power level control in sectors
• Environment adaptation
• Control / profiles / BITE
Featuring
GSR Ground Surveillance, full coherency and frequency diversity
Frequency
Programmable frequencies between 17.1–17.3 GHz
4 sub-bands
Transmitter
8 W SSPA
Receiver
Digital sampling on IF in 12 bits at 200 MHz
Range cell size: 6 m (3 m at instrumented range ≤ 6 km)
External Interfaces
IP network radar signals
Control and monitoring via IP network / serial connection ports
Design
Encapsulated, integrated unit architecture
Maintenance
Remote access to radar video, control and monitoring
BITE for fault management and diagnosis
Antenna
Parabolic reflector
Standards
CE, IEC, UL-60950