Tools
Required Tools
NOTE: Drill bit sizes assume wood mounting surfaces. If installing on concrete or other masonry,
consult with an electrician for optimal pilot hole sizes.
Torque Driver (50 lbf . in, 5.6 Nm)
Multimeter
Stud Finder
Tape Measure
Wire Stripper Drill Bit, 1/4 in (6.5 mm) Drill Bit, 5/32 in (4 mm)
Bit Driver
Level
Smartphone (with Wi-Fi) Power Drill
Optional Tools
Step Bit, 1-1/8 in (29 mm) Step Bit, 1-3/8 in (35 mm)
Computer (with Wi-Fi)
INSTALLATION
17Gen 3 Wall Connector Manual
To Next Page
Loading...
