Installation Considerations
Wall Connector may be installed on any flat, vertical surface capable of supporting its weight (e.g. wall,
pedestal, etc.). Wall Connector weighs .
Choosing Location
Install Wall Connector in a location that allows the charge cable to reach the vehicle charge port without
putting strain on the cable. Recommended installation area for Wall Connectors with 24 ft (7.3 m) cable:
Install Wall Connector in a location with ample clearance on all sides to allow the charge cable to loop
around the unit and the charge handle t
o comfortably land in the side dock.
NOTE: If constrained by space, a cable organizer can be installed near the Wall Connector
(sold
separately).
INSTALLATION
18Gen 3 Wall Connector Manual
To Next Page
Loading...
