TESTO 325M - Settings (Continued); Unit Configuration; Date and Time Configuration

16
6. Settings
6.3 Selecting units
1 Select Unit in the main menu ➀ and confirm
with .
- Pressure flashes and the set unit for pressure is shown in
the display ➁.
2 Select required pressure unit using .
3 Change to Temperat using and select required
temperature unit using .
4 Change to GAS using and select required gas unit using
.
5 Confirm settings using .
- Selected units are accepted and the analyser changes to the
measurement menu.
6.4 Setting date/time
1 Select Dat/Clk in the main menu ➀ and confirm selection
selection via .
- The set date is shown and “Day” flashes ➁.
2 Set “Day” using or .
3 Change to “Month” and “Year” using and set using or
respectively.
4 Change to time setting via .
- The set time is shown and “Hour” flashes ➂.
5 Set “Hour” via or .
6 Use to change to “Minutes” and set via or
“Minutes”.
7 Confirm selection via .
- Selected date and time are accepted and the analyser
changes to the measurement menu.
➀
➂
➁➀
➁