TESTO 325M - Measuring (Continued); Data Management: Save, Read, Delete

21
7. Measuring
7.7 Saving/reading/deleting readings
Readings can only be saved with testo 325XL.
20 memory blocks are available (Memory 1 to Memory20) in
which 1 set of readings can be saved.
Blocks which are already occupied are identified by and
the date and time when saved are displayed. Saving on a
memory block which is already occupied means that the
readings that are already saved are overwritten.
1 Select Memory in the main memory ➀ and confirm your
selection with .
2 Select required memory block with or ➁ and confirm
with .
3 Using or choose from Write (save readings) ➂, Read
(read readings) or Delete (delete readings) and confirm
selection with .
If you select Write:
- Clearance query (Really) appears if data is already stored
on the memory block.
Answer clearance query (Really) with .
- The selected memory block name flashes and and
date/time when saved light up ➃. The readings are saved.
-or-
If you select Read:
- The readings contained in the selected memory block are
displayed and flashes.
-or-
If you select delete:
Answer clearance query (Really) with .
- The readings stored in the selected memory block are
deleted.
Press to return to memory selection or measurement
menu.
➃
➀
➂
➁