Texas Instruments ADS1298ECG-FE

www.ti.com ADS1298ECG-FE/ADS1198ECG-FE Overview
5
SBAU171D–May 2010–Revised January 2016
Submit Documentation Feedback
Copyright © 2010–2016, Texas Instruments Incorporated
ADS1298ECG-FE/ADS1198ECG-FE
• QRS detection algorithms
• Software PACE detection algorithms
1.5 ADS1x98ECG-FE Hardware
Figure 1 shows the hardware included in the ADS1x98ECG-FE kit. Contact the factory if any component is
missing. The latest software is available for download on the TI website at http://www.ti.com.
Figure 1. ADS1x98ECG-FE Kit
The complete kit includes the following items:
• ADS1x98ECG-FE printed circuit board (PCB)
• MMB0 (Modular EVM motherboard)
1.6 Minimum System Requirements for ADS1x98ECG-FE Evaluation Software
The minimum system requirements for using the ADS1x98ECG-FE software application are:
• Pentium III
®
/Celeron
®
processor, 866MHz or equivalent
• Minimum 256MB of RAM (512MB or greater recommended)
• USB 1.1-compatible input
• Hard disk drive with at least 200MB free space
• Microsoft
®
Windows
®
XP operating system with SP2 or Windows 7 operating systems (Windows Vista
not tested)
• Mouse or other pointing device
• 1280 x 960 minimum display resolution