Quick Start
www.ti.com
6
SBAU171D–May 2010–Revised January 2016
Submit Documentation Feedback
Copyright © 2010–2016, Texas Instruments Incorporated
ADS1298ECG-FE/ADS1198ECG-FE
2 Quick Start
This section provides a QuickStart guide to quickly begin evaluating the EVM using the ADS1x98ECG-FE
software.
2.1 Default Jumper/Switch Configuration
Figure 2 shows the jumpers found on the ADS1x98ECG-FE EVM and the respective factory default
conditions for each.
Figure 2. ADS1x98ECG-FE Default Jumper Locations
Table 1 lists the jumpers and switches and the factory default conditions.
To Next Page
Loading...
