Callbacks
www.ti.com
116
SWRU271H–October 2010–Revised April 2019
Submit Documentation Feedback
Copyright © 2010–2019, Texas Instruments Incorporated
GAPRole Peripheral Role API
B.3.2 RSSI Callback (pfnRssiRead)
When enabled, this function reports the RSSI to the application at a rate set by the
GAPROLE_RSSI_READ_RATE GAPRole parameter. Setting this parameter to 0 disables the RSSI
reporting. This function is defined as follows:
This function passes a signed 1-byte value (newRSSI) of the last reported RSSI to the application.
To Next Page
Loading...
Need help?
General
