www.ti.com
Gap Bond Manager (GAPBondMgr)
41
SWRU271H–October 2010–Revised April 2019
Submit Documentation Feedback
Copyright © 2010–2019, Texas Instruments Incorporated
The Bluetooth Low Energy Protocol Stack
The GAPBondMgr pairing states are passed to the application callback when required during the pairing
process. GAPBOND_PAIRING_STATE_STARTED is passed when sent or received by the stack.
GAPBOND_PAIRING_STATE_COMPLETE is sent when the pairing completes. A Just Works pairing
requires the pair-state callback. For more information, see Section F.4.
To Next Page
Loading...
