SPRUHU4D—February 2016 Examples for TI-RTOS 31
Submit Documentation Feedback
www.ti.com Installing USB Drivers for the USB Device Examples
3.9 Installing USB Drivers for the USB Device Examples
The USB examples build upon the examples provided with MSPWare. Because the examples mimic the
same functionality, you can use the same drivers delivered with standalone installations of MSPWare.
USB drivers for MSP430 are located in each example's
USB_config
folder.
The Windows menus and dialogs you see may be slightly different from those shown here, depending
on your version of Windows.
To install the USB driver, follow these steps:
1. Load and run a USB device reference example—USB Keyboard Device, USB Mouse Device, or USB
CDC Mouse Device.
2. While the example is running, connect the device to the Windows PC via a USB cable. At this point,
Windows will detect the device and attempt to enumerate it.
3. Open the Windows Device Manager by right-clicking on the My Computer desktop icon or
Computer in the Start Menu and selecting Manage.
4. If you are prompted by a security warning in Windows 7, click Yes.
To Next Page
Loading...
Need help?
General
