3
Examples
Each section is followed by instructions for keystroke
examples that demonstrate the TI-36X Pro functions.
Examples assume all default settings, as shown in the Modes
section.
Some screen elements may differ from those shown in this
document.
Switching the calculator on and off
& turns on the calculator. % ' turns it off. The display
is cleared, but the history, settings, and memory are retained.
The APD™ (Automatic Power Down™) feature turns off the
calculator automatically if no key is pressed for about 5
minutes. Press & after APD. The display, pending
operations, settings, and memory are retained.
Display contrast
The brightness and contrast of the display can depend on
room lighting, battery freshness, and viewing angle.
To adjust the contrast:
1. Press and release the % key.
2. Press T (to darken the screen) or U (to lighten the
screen).
Home screen
On the Home screen, you can enter mathematical
expressions and functions, along with other instructions. The
answers are displayed on the Home screen. The TI-36X Pro
screen can display a maximum of four lines with a maximum
of 16 characters per line. For entries and expressions of more
than 16 characters, you can scroll left and right (!and ") to
view the entire entry or expression.
In the MathPrint™ mode, you can enter up to four levels of
consecutive nested functions and expressions, which include
fractions, square roots, exponents with ^, Ü, e
x
, and 10
x
.
To Next Page
Loading...
Need help?
General
